DS PH200M Powermatic 80

Ref. C036.407.18.040.00

Case diameter: 42.8 mm; Manufacturer spec
Lug-to-lug: 52.1 mm; Manufacturer spec
Thickness: 11.9 mm; Manufacturer spec
Lug width: 20 mm; Manufacturer spec

Your wristSnug, lugs near the edge

Wrist flat: 55.1 mmLug-to-lug: 52.1 mm

How the DS PH200M Powermatic 80 wears

Its lugs reach 9.3 mm past the 42.8 mm case, more than the 7.1 mm typical across the almanac, so it wears larger than its diameter suggests.

On our fit model it sits best on wrists from 7.25" to 8.5" (18.4–21.6 cm); below 7.25" the lugs start to reach the edge of the wrist.

At 11.9 mm thick it is slimmer than 85% of the 79 other dive watches we've measured, so it slides under a cuff more easily than most.

Its 20 mm lug width is one of the most common strap sizes; 104 other watches here share it, so aftermarket straps are easy to find.

Will the DS PH200M Powermatic 80 fit your wrist?

With a 52.1 mm lug-to-lug, here is how it wears across common wrist sizes. We estimate the flat top of each wrist from its circumference; measure yours for a closer answer in the fit finder.

Wrist	Flat width (est.)	Fit
6"	47.2 mm	Lugs overhang
6.5"	51.2 mm	Lugs overhang
7"	55.1 mm	Snug, lugs near the edge
7.5"	59.1 mm	Ideal fit
8"	63 mm	Ideal fit

Specifications

Reference: C036.407.18.040.00
Collection: DS PH200M
Status: In production
Case material: 316L stainless steel
Crystal: sapphire
Water resistance: 200 m
Bezel: rotating dive bezel, stainless steel
Dial: blue
Strap / bracelet: NATO strap, quick-release
Weight: 92 g
Style: Dive

Movement

Caliber: ETA (Certina) Powermatic 80.611
Type: automatic
Power reserve: 80 hours

4 other watches use the ETA Powermatic 80.611

Takes 20 mm straps. See other 20 mm watches and straps.

Watches that wear the same size

Other watches within 1.5 mm of its lug-to-lug.

Same 20 mm lug width

All 20 mm watches

These take the same straps as the DS PH200M Powermatic 80.