Watch Almanac
Ming

37.07 Monolith

Case diameter
38 mm
Manufacturer spec
Lug-to-lug
44.5 mm
Manufacturer spec
Thickness
10.9 mm
Manufacturer spec
Lug width
—
Not published
Ideal fit
Wrist flat: 55.1 mmLug-to-lug: 44.5 mm

How the 37.07 Monolith wears

Its lugs add 6.5 mm to the 38 mm case, close to the 7 mm typical across the almanac, so its diameter is a fair guide to how it wears.

On our fit model it sits best on wrists from 6.25" to 7.5" (15.9–19.1 cm); below 6.25" the lugs start to reach the edge of the wrist.

At 10.9 mm thick it is slimmer than 51% of the 75 other dress watches we've measured, so it slides under a cuff more easily than most.

Will the 37.07 Monolith fit your wrist?

With a 44.5 mm lug-to-lug, here is how it wears across common wrist sizes. We estimate the flat top of each wrist from its circumference; measure yours for a closer answer in the fit finder.

WristFlat width (est.)Fit
6"47.2 mmSnug, lugs near the edge
6.5"51.2 mmIdeal fit
7"55.1 mmIdeal fit
7.5"59.1 mmIdeal fit
8"63 mmWears small

Specifications

Reference
37.07 Monolith
Collection
37.07
Status
Discontinued
Introduced
2023
Case material
stainless steel with matte black DLC
Crystal
domed sapphire, AR both sides
Water resistance
100 m
Bezel
none
Dial
black
Strap / bracelet
Jean Rousseau calfskin strap with Alcantara lining
Style
Dress

Movement

Caliber
Ming SW210.M1
Type
manual
Power reserve
40 hours

Watches that wear the same size

Other watches within 1.5 mm of its lug-to-lug.

Sources